Identify the structural member.
Distinguish the load-carrying beam from perimeter fascia and other finish boards.
Decks · Keyport, Washington
Decks in Keyport, WA.
Decks in Keyport needs a drawing that distinguishes structural beam joints from decorative fascia seams.
Ask the designer where the real beam pieces meet and how each proposed splice is supported and connected. The visible trim pattern does not describe that structure.
Deck construction
Show the beam splice in the support layout.
Have the designer identify the beam members, their joints and the assessed bearing and connection details at those locations. Compare that layout with the posts and other supports shown in the proposal. Do not treat a face-board joint or an added fastener allowance as proof that the structural beam has a suitable splice.
Mark the actual joints.
Ask where each beam piece ends, including joints hidden by the final trim.
Obtain the assessed detail.
Have the designer resolve support and connections for those joints before the material order and construction.
Before work begins
Use the current County design path.
The County links a March 2025 Basic Deck tip sheet based on the 2021 IRC with Washington amendments. Ask DCD and the designer which details and project-specific documentation apply to the actual deck.
No beam capacity, splice dimension, fastener schedule or permission to modify an existing structure is supplied here.
Decks questions for Keyport homeowners.
Does a fascia seam identify the beam splice?
Have the designer distinguish the finish board and the structural members behind it.
Can extra screws alone approve a splice?
Request the actual assessed bearing and connection design.
Can an older guide replace the current County review?
Confirm the applicable design and review with DCD and the responsible designer.
Bring the beam and support layout into the estimate.
Share any existing drawings and ask where joints and their designed support appear in the proposal.
